Microfluidic equipment

Our microfluidic equipment enables the full functionality of the mp6 micropump.

That is why – besides the different micropumps – we also offer microfluidic equipment like bubble traps, hoses, hose clamps, manifolds, and much more. With the help of these components, you can build up your microfluidic system quickly and easily.

Also have a look at our store and see how you can combine the microfluidic equipment, the mp6 and our partner components to a fully functional set.

mp-bt

Bubble trap

A bubble trap to get rid of bubbles in your flow stream (Check out the video and the bubble trap product page to learn more!)
Dimensions: 17 x 19 x 10 mm
Material: PPSU, PET
Media: Water based solutions
Ports: Ø 1,9mm suitable for 1,3mm mp-t
Internal volume: 100 µl
Water entry pressure: 1,9 bar
Necessary neg. pressure: 100 – 200 mbar
Necessary equipment: mp6 at 250Vpp/300Hz

mp-f

Filter

Protection of fluidic systems from particles.
Dimensions
21 mm x 5.5 mm 0.82677 in. x 0.2165 in.
Fluidic connectors
barbed tube clip,
length : 5.6 mm for tubing with internal diameter: 1.3 mm
Filter porosity 20 – 60 µm

mp-damper

Pulsation damper for liuids

The damper reduces the pulsation of liquid from micropumps so that sensors can measure more reliably
Dimension: 17 x 19 x 5 mm
Material: PPSU, FKM, PP, epoxy-based adhesive

mp-mf

Mounting frame

This frame helps to mount the mp6 micropump via screw
Dimensions: 33 x 18 x 4 mm
Material: PLA, blue
Suitable screw: M1,6

mp-hc

Hose clamps

Hose clip to prevent leakage in high pressure applications.
Inner diameter (when closed) 3 mm
Dimensions
In closed state: 4 mm x 5,1 mm
Width (in tube direction): 2 mm
Suitable tube tygon hose 1.3 mm connected with barbed tube clip

mp-y

Tubing connector

Y-connector for tubing, for the parallel use of two micropumps

Material polypropylene (PP) for tubing inner diameters of 1,3 – 2,6 mm 0.0512 – 0.1024 in.

mp-mol

Connector

compatible with:
mp6-liq, mp6-pi, mp6-pp, mp6-gas, mp6-gas+
FFC connectors can be electrically contacted for your own cable assemblies.
different versions: different applications
Connector to micropump mp6-series for custom made cabling
Type:
Molex FCC 39532045 1.25 mm pitch Contacts 4 Entry Angle/Orientation Vertical PC Tail Length 3.50 mm Operating temperature -20°C – 80°C Voltage max. 200V Current max. 1.0 A per contact Termination
Interface: Style Through Hole

mp-t

Tubing

Inlet/outlet compatible Tygon® tubing.
Inner diameter 1.3 mm or 1.02 mm
Outer diameter 3 mm or 2.74 mm
Wall thickness 0.85 mm or 0.86 mm
Sterilizable Yes (autoclave or ethylene oxide
Color transparent
Suitable micropumps mp6-liq, mp6-gas

mp-s

Silicone tubing

Inlet/outlet compatible hose made off silicone
Inner diameter: 1 mm
Wall thickness: 1 mm
Sterilization possible: Yes (steam sterilization)
Temperature resistant up to +200°C (permanent) or +250°C (short-term)
Color: transparent
Suitable micropump mp6-liq, mp6-gas

Reservoir Bundle

Microfluidic reservoir for direct and indirect flow applications.
The bundle includes a screw neck vial, the screw closure with hole and septum, a short dosing tip and a long dosing tips well as male Luer to Bard connectors. You can find all the technical details in our shop and in the Accessories catalogue.
The reservoir has a high chemical resistance due the materials used – glass and stainless steel.

mp-con

Connection cable

Connector for mp6-series to mp-x

Design and connectors – Molex FCC 1.25 mm pitch – 85 cm (33.465 in.) cable – Binder 620 connector

For technical data about our microfluidic equipment, please refer to the data sheets (in the download area).