Electronics

The key to the successful use of microtechnology is well-designed and flexible electronics that enable easy control of the system. Our goal is to provide an electronics solution for your microtechnology application.

As a result, we now have a rich portfolio of electronic components for microtechnology, from laboratory applications to integration into mobile devices. In other words, from large-scale control to accompanying your series electronics, we offer a complete setup to turn an idea into a real success.

And to go one step further towards series production in microtechnology, we also offer an electronics briefing that enables the savvy professional to integrate our electronics into their own application in a cost- and space-saving way.

Mp6 micropumps in production BArtels Mikrotechnik from Dortmund producing for microfluidics and microtechnology

Electronics for our micropumps

The mp-x electronics from Bartels Mikrotechnik, a microtechnology company from Dortmund. The device offers control for micropumps in the field of microfluidics.

mp-Labtronix

Laboratory box

Access to the full range of driving parameters. A system for the professional evaluation of the micropumps.

  • Dimensions:
    7,5 x 16 x 20 cm 2.983 x 6.299 x 7.874 in.
  • Weight ca. 800 g
  • Adjustable parameters amplitude, frequency, signal form
  • Amplitude range 0 – 250 V
  • Frequency range 0 – 300 Hz Signal form SRS, rectangular, sine
  • Power supply mains adaptor
  •  Current consumption 750 mA at 7,5 V USB-Port one
  • Connectable micropumps:
    mp6-liq, mp6-pi, mp6-pp, mp6-gas: 1x with mp6-con
Evaluationboard for the use of all our driverchips and testing the mp6 micropumps

mp-Mulitboard

Evaluation board

The mp-Multiboard is an evaluation board that allows controlling one of our I²C controlled pump-drivers (mp-Lowdriver, mp-Highdriver, mp-Highdriver4) through an Arduino microcontroller.
Up to four mp6 micropumps can be directly connected to the board. An external power supply connector is available, but the board can also be powered through the microcontroller USB port. The board has multiple auxiliary connectors for future use with active valves, pressure and flow sensors. The mp-Multiboard comes preprogrammed with an interface software and windows application. Arduino source-code is available on our website. Interface protocol will be available soon.

  • Dimensions (circuit board):
    100 x 50 x 17 mm
  • Adjustable parameters depens on the used driver
  • Amplitude range depens on the used driver
  • Frequency rangedepens on the used driver
  • Signal form depens on the used driver
  • USB Power supply 7.5 – 12 V, 500 mA

Integrable electronics for our micropumps

mp-Highdrier

Pump driver

The mp-Highdriver drives the micropump at adjustable performance in a package similar to an integrated circuit. It enables integration into system electronics or on a PCB.

  • Dimensions:
    10,16 x 25,4 x 2,82 mm
  • Adjustable parameters amplitude, frequency, signal shape
  • Amplitude range 10 – 250 Vpp
  • Frequency range 50 – 800 Hz
  • Signal form sine, rectangular, others
  • Interface I2C
  • Power supply: 2.7 – 5.5 VDC
  • Current consumption avg. 30 mA at 5 V
  • Pin arrangement DIL 18; horizontal ~2.54 mm, vertical ~7.62 mm
Driver chip to reach low flowrates with the mp6 micropump

mp-Lowdriver

Pump driver

The mp-Lowdriver drives the micropump at adjustable performance in a package similar to an integrated circuit. It enables integration into system electronics or on a PCB.

  • Dimensions:
    10,16 x 25,40 x 2,64mm
  • Adjustable parameters amplitude, frequency, signal shape
  • Amplitude range 0– 150Vpp
  • Frequency range:
    8 – 2000 Hz
  • Signal form: sine, custom
  • Power supply: 3 – 5.5 VDC
  • Current consumption ca. 30 mA at 5 V
  • Pin arrangement DIL 18; horizontal ~2.54 mm, vertical ~7.62 mm
electronics oem for microtechnology the field of microfluidics for micropump Bartels Mikrotechnik

mp-Highdriver4

Pump driver for up to 4 pumps

The mp-Highdriver4 is a pump driver that allows driving up to four mp6 micropumps simultaneously. It comes in a package similar to an integrated circuit that enables integration into system electronics or on a PCB. The driving frequency, amplitude and also the driving signal is adjustable. Sine signal and rectangle are available amongst others. Every pump can be activated and deactivated individually. This driver is configured and controlled through an I²C interface.

  • Dimensions:
    38,1 x 17,78x 11,6 mm
  • Adjustable parameters amplitude, frequency, signal shape
  • Amplitude range 0 – 250 Vpp
  • Frequency range 50 – 800 Hz
  • Signal form sine, rectangular, others
  • Interface I2C
  • Power supply: 2.7 – 5.5 VDC
  • Current consumption avg. 75 mA
  • Pin arrangement DIL28; horizontal 2.54 mm, vertical 15.24 mm

The technical data can be taken from the data sheets (in the download area).

If you have questions about a previous electronics or the electronics you use is no longer visible, please contact us via our contact form.

If you exaclty know what you need for your microfluidic system please feel free to check out the preassembled evaluation kits (for testing purpose) in our online shop, or select your own kit.

You are unsure how to use the mp-multiboard exactly?

Then take a look at our how-to videos here:

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Request a Quote

    Please confirm that you have read our data protection declaration and that you agree to its content. Privacy Statement