Accessories - Component Parts

Our microfluidic equipment enables the full functionality of the mp6 micropump.

That is why – besides the different micropumps – we also offer equipment like hoses, hose clamps, manifolds, valves and much more, with which you can build up your microfluidic system quickly and easily.

Also have a look at our store and see how you can combine the microfluidic equipment, the mp6 and our partner components to a fully functional set.

.

this is a filter for microfluidic systems mp-f compatible with mp6 micropump from manufacturer Bartels Mikrotechnik in microtechnology

mp-f

Filter

  • Protection of fluidic systems from particles.
  • Dimensions 21 mm x 5.5 mm 0.82677 in. x 0.2165 in.
  • Fluidic connectors barbed tube clip, length : 5.6 mm for tubing with internal diameter: 1.3 mm Filter porosity 20 – 60 µm
  • Component parts mp Con for microtechnology in the field of microfluidics and compatible with mp6 micropump

    mp-con

    Connection cable

  • Connector for mp6-series to mp-x
  • Design and connectors – Molex FCC 1.25 mm pitch – 85 cm (33.465 in.) cable – Binder 620 connector
  • the mp-damper to reduce the pulsation between the micropump mp6 and the sensor

    mp-damper

    Damper

    • The damper reduces the pulsation of liquid from micropumps so that sensors can measure more reliably
    • Dimension: 17 x 19 x 5 mm
    • Material: PPSU, FKM, PP, epoxy-based adhesive
    Component parts mp hc hose clamps for microtechnology in the field of microfluidics and compatible with mp6 micropump

    mp-hc

    Hose clamps

  • Hose clip to prevent leakage in high pressure applications.
  • Inner diameter (when closed) 3 mm
  • Dimensions In closed state: 4 mm x 5,1 mm Width (in tube direction): 2 mm Suitable tube tygon hose 1.3 mm connected with barbed tube clip
  • For hose in microfluidics and microtechnology compatible with mp6 micropump Bartels Mikrotechnik

    mp-y

    Tubing connector

  • Y-connector for tubing, for the parallel use of two micropumps
  • Material polypropylene (PP) for tubing inner diameters of 1,3 – 2,6 mm 0.0512 – 0.1024 in.
  • Component parts mp Mol for microtechnology in the field of microfluidics and compatible with mp6 micropump

    mp-mol

    Connector

    • compatible with:
      mp6-liq, mp6-pi, mp6-pp, mp6-gas, mp6-gas+
    • FFC connectors can be electrically contacted for your own cable assemblies.
    • different versions: different applications
    • Connector to micropump mp6-series for custom made cabling
    • Type:
      Molex FCC 39532045 1.25 mm pitch Contacts 4 Entry Angle/Orientation Vertical PC Tail Length 3.50 mm Operating temperature -20°C – 80°C Voltage max. 200V Current max. 1.0 A per contact Termination
    • Interface: Style Through Hole
    Component parts mp t compatible with hose clamps for microtechnology in the field of microfluidics and compatible with mp6 micropump 2

    mp-t (1,3 mm)

    Tubing

    • Inlet/outlet compatible Tygon® tubing.
    • Inner diameter 1.3 mm Outer diameter 3 mm Wall thickness 0.85 mm Sterilizable Yes (autoclave or ethylene oxide
    • Color transparent Suitable micropumps 1 m Suitable micropumps mp6-pi, mp6-gas, mp6-pi
    Component parts mp t compatible with hose clamps for microtechnology in the field of microfluidics and compatible with mp6 micropump 2

    mp-t (1,02 mm)

    Tubing

  • Inlet/outlet compatible Tygon® tubing.
  • Inner diameter 1.02 mm Outer diameter 2,74 mm Wall thickness 0.86 mm Sterilizable Yes (autoclave or ethylene oxide
  • Color transparent Packaging unit 1 m Suitable micropumps mp6-pp
  • For technical data please refer to the data sheets (in the download area).

    Request a Quote

      Please confirm that you have read our data protection declaration and that you agree to its content. Privacy Statement