mp6 Micropump

Image
Bartels micropump mp6

The Bartels micropump mp6 combines two piezo actuators inside one single housing. It joins the established functional principle and central advantages of its parent generation mp5 with its own specific innovative features.

The small power pack can handle twice the back pressure the mp5 can cope with, has an increased priming capability and is of higher bubble tolerance, so that even gas-liquid-mixtures can be pumped without problems.

In the entire pump only one material gets into contact with the medium: all relevant parts are made of PPSU. Low prices in large quantities due to an automated assembly and a low power consumption are further advantages of the upcoming mp6.

Typical characteristics of the mp6:

Image Image Image

The mp6 can be operated with the electronic controller mp-x.

For further information on the mp6 download the datasheet for micropumps and auxiliary equipment
or contact our experts for all microfluidic products by Bartels microComponents.

Image
micropump mp6

The mp6 at a glance:

- 2 piezo actuators
- 30 x 15 x 3.8 mm³
- 2 g weight
- 0 - 70 °C operating temperature
- > 5000 h live time

Flow and back pressure for selected media

Air:
- max. flow: 18 ml/min (300 Hz)
- max. back pressure: 100 mbar (300 Hz)

Water:
- max. flow:  6 ml/min (100 Hz)
- max. back pressure: 550 mbar (100 Hz)

(values defined setting mp-x to 250 V, SRS)