Bartels Equipment

Next to our micropumps and control units we are offering auxiliary equipment as well, which enables you a quick and easy assembly of your application. 

  • mp-t tygon tubing Open or Close

    On request, we will deliver suitable hose materials for the connections of the Bartels micropumps.

    mp t Tygonschlauch

    Transparent Tygon® tubing with an inner diameter of 1.3 mm for the mp5, mp6 and mp6-AIR micropumps, and with an inner diameter of 1.02 mm for the mp6-pp micropump can be ordered by metre.

    Properties and benefits:

    • Lot-to-lot consistency for reproducible results
    • Increases productivity in pumps – outlasts other clear tubing 2 to 1

    • Standard sizes available to hold full vacuum at room temperature
    • Smooth, polished inner wall
    • Non-oxidizing and non-contaminating
    • Slips easily over fittings and grips securely for simple lab set-ups
    • Contains no BPA


    Further Information

  • mp-cv check valve Open or Close

    When the micropump is switched off, a back flow of the pumping medium, depending on a differential pressure between in- and outlet is possible! mp cv Rückschlagventil

    In order to impede a back flow Bartels Mikrotechnik offers a passive check valve integrated in stainless steel.

    The connection of the valves with the micropump can be done easily with suitable tubing.


    21 mm x 5.5 mm (length x wrench size)
    0.82677 x 0.2165 in.

    materials Silicone, stainless steel
    fluid connectors

    for tubing with an ID of 1.3 mm

    cracking pressure typical < 35 mbar
    max. back pressure 500 mbar
    typical leak rate < 20µl/h for DI-water (at 500 mbar)


    Further Information

  • mp6-mol connector Open or Close

    The mp6, mp6-AIR and mp6-pp pump can be connected via a FCC connector. mp6 mol Molexstecker

    Each piezo (P1 / P2) has a single lead for the negative (-P1/-P2) and the positive (+P1/+P2) supply voltage.

    The connector is available in different versions to fit various applications.

    number of contacts 4 contacts
    gender receptacle
    pitch spacing 1.25 mm
    contact termination type through hole
    number of rows 1 row
    contact plating tin plated contacts
    contact material phosphor bronze
    FFC/FPC thickness 0.3 mm


    Further Information

  • mp6-con cable Open or Close

    The micropumps mp6, mp6-AIR and mp6-pp can be connected to the

    mp-x controller by means of the mp6-con cable.mp6 con Verbindungskabel

    cable length  1 m
    side 1  

    molex connector 4 pole
    FCC/FPC thickness 0.3 mm
    grid dimensions 1.25 mm
    tin plated contacts

    side 2 truss cable plug 620


    Further Information

  • mp-y tubing connectors Open or Close

    Y-connector for tubing made of natural coloured PP, for the parallel use of two micropumps. mp y Y Schlauchverbinder

    All-round with the same olive-size. Slightly transparent, autoclavable.

    Excellent quality with a constant inner diameter, caused uniform flow rates and tight connection.




    material polypropylene (PP)
    for tubing with an ID of

    1,3 – 2,6 mm
    0.0512 – 0.1024 in.


    Further Information


Request a Quote